Why customers love [automatic nail gun]

< Rivet machine Working principle: The riveting method of using a rivet rod to pressurize the rivet locally and swing continuously around the center until the rivet is formed.

< span> Riveting machine Operation method:

rivet machine , the operator should keep his legs apart.

2, when testing the wind rivet machine , it should be on the pier, not allowed to test on the cement floor and steel plate.

3. When checking the air duct, the air stop door must be closed. It is strictly prohibited to lift the rivet gun, place it sideways and peer inside.

4, the head of the pneumatic rivet machine should be tied with wire on the handle, and should not be placed in a place that is not easy to collide.

5, it must be confirmed that the top is firmly in order to open the wind riveting, such as the workpiece is large, can not see the top of the personnel, should be echoed to each other.

6, before the tilt riveting operation, should wear protective glasses, tie the cuffs, buckle the collar. Head should avoid directly under the rivet.

7, must wait until the head contact the rivet, can open the wind riveting, start to give the wind is not too large.

8, nail burning core temperature is low, no riveting. When the nail needs to exit, it must be allowed by the top nail holder before gently tapping.

9, the use of rivet machine , electrical switches, tubing joints and other parts, should be in good condition, move to be flexible, the boom should have a firm end magnetic head. When moving, pay attention to people and things.
If you have any questions or inquiries, please call our service hotline: 4006-784-785

Last：The purchase of [riveting machine] should pay attention to these problems Next：The working principle, characteristics and operation method of the riveting machine

Why customers love [automatic nail gun]

HOT article

Relevant news

Contact Us